...
Quick Guide
The quick guide is giving you a quick overview of the basic work flow operators must know to get a report that contains the most important inspection data
...
WinCan VX; Main Interface for Section Survey
...
WinCan VX; Main Interface for Lateral Survey
...
WinCan VX; Main Interface for Manhole Survey
...
Highlight a section, lateral or a manhole and double click on it. This is going to open the input mask below, where you can enter all the data needed for the current object. Fields highlighted in YELLOW are mandatory and require data entry:A field template in the background controls, which fields and field properties have to be available, in order the user is able to enter data as defined by the country specific survey standard (e.g. PACP, WRC, WSA etc.).Number of inspections for the current sectionInspection fieldsSection fields 
...
Entering Observations via Damage Catalogues
The structure of damage catalogues strongly depends upon the standards that are defined by independent authorities. The example below shows and excerpt of the catalogue PACP-6, mainly used in the United States (imperial version) and Canada (metric version):The catalogue opens and shows additional parameters on the right hand side. When highlighted in YELLOW you must enter a value in to this field, otherwise you are unable to confirm the observation with the green OK-button.*1*Type the OP-Code or a part of the observation text into the SEARCH field (1) and double click on the catalogue entry which has been filtered out. 
...
Damage catalogues in WinCan VX allow the operator to have the most used OP-Codes listed at the top of the code index (1), so there's no need to manually browse for them anymore: simply select the corresponding OP-Code and hit the key F3. To remove the code from the list, select it and type the shortcut Ctrl + F3.1 
...
The operator also can create his own list of default remarks used to specify the current observation. Such a list will then be valid for each OP-Code that provides a text box for remark entry. Right click on the text Remarks (1), hit the command Edit list (2), enter the remark text into the list box panel (3) and confirm with the OK-button (4). From now the remarks you set are available when pushing the arrow button (5) right to the remark entry field:34 
2 
51 
...
Navigation Functionalities
Use the navigation buttons to browse through the section list.Move the red slider to navigate through the observation table and the video clip simultaneously. 
Deleting Objects and Media Data
...
Check the OSD-settings in order to be able to control the display of various text parts as project bar, section data (object data) and values directly provided by OSD-objects (date, time, inclination, distance…) directly from the WinCan software:
32*1*Click here to check the communication between the selected OSD-device and the computer -> GREEN = OK 
Once the communication between OSD-device and computer is established, project bar, section data and observation text are displayed as soon as the user hits the corresponding buttons.
231Section data31 
2ObservationProject bar 
...