...
Quick Guide
The quick guide is giving you a quick overview of the basic work flow operators must know to get a report that contains the most important inspection data
...
Select the command Projects > Project Participants to open the address panel: the left part is subdivided into three address categories: right click into each category or hit the button 
to create a new address and enable the check box to assign a specific address to the current project:
...
1 
The right part of the panel allows the user to manage a list of operators, cameras and trucks, which can then be selected directly from the corresponding fields within the inspection panel (page 9).
Client, manager and contractor addresses that have got a check mark will be printed on the project information page. So always make sure you properly assigned the addresses to the current project before you print the whole report.
The contractor panel provides an additional command button to set the currently selected address as the default contractor (1).
This address is going to be assigned automatically to future projects.
To change the contractor's logo simply double-click on the address line, go to the logo line field in the address input mask and click on the grey square button. This is going to open a Windows dialogue where you can browse for the corresponding logo file:
...
Finally hit the button 
to save your changes.
Each address you create is saved to the file WCMETA.sdf, which is located in the installation folder C:\Users\Public Documents\CDLab\Common\Ressources\sqlCE.
The addresses you have just assigned to the current project are saved to the file [project name]_Meta.sdf which you can find in the project folder DB.
Printing Printing Inspection Reports
Select the command Printing > Printing Panel to open the printing dialogue. Enable the kind of reports you want to print in the left part (1). Select any report type to show a group of specific options you may enable or disable for that report (2).
The third part (3) of the printing dialogue provides options to control the data output.
12 
3 
Finally click on the printer icon to get either a print preview or a PDF file of the inspection report. The progress of this procedure is shown in the status bar below.
Especially mind that large projects with several hundred sections, laterals and manholes may take more than 45 minutes to be printed.
Example of an inspection report:
...