...
Quick Guide
The quick guide is giving you a quick overview of the basic work flow operators must know to get a report that contains the most important inspection data
...
Right click on any record inside the overview panels, hit the command Delete or select the corresponding icon in the symbol bar. To delete only photos or video clips, right click on the corresponding icon in the observation panel and hit the command Delete photo 1/2 or Delete Clip:
...
IMPORTANT:
WinCanVX NEVER deletes your data: deleted sections, inspections, laterals or manholes can always be restored via the project manager (Projects > Manage Projects). Deleted photos and video clips are moved directly into the project sub-folder TRASH and can be restored from there.
...
Always check the LiveVideo settings prior to start recording video clips with your camera equipment: WinCan VX officially supports to MPEG-encoding devices. After the installation of the software package WinCanVXDriverSetup.exe the corresponding entries appear in the dialogue box as shown below:
1432 
5
6
Select the entry Vitec VM4 or MobileCap124 depending upon which one of these MPEG encoding devices you have currently installed:
Switch on the camera and hit the camera icon 
to show the LiveVideo signal in the video panel. Pushing the recording button then starts recording a video clip:
Start, pause and stop recordingTake picture from LiveVideoAdjust image quality
during recordingSwitch off
LiveVideo 
Video recording is paused automatically as soon as the damage catalogue is open.
Double click on the clip icon 
in the field Clip to play back the video clip or double click on the photo icon 
in the field Photo1/Photo2 to show the picture:
Close video clipAdjust panel
to full screen sizeSlide to play back video clip at a specific location 
Set play back speed
(far left = "normal")Play back video clip, pause and stop play back
...
Check the OSD-settings in order to be able to control the display of various text parts as project bar, section data (object data) and values directly provided by OSD-objects (date, time, inclination, distance…) directly from the WinCan software:
32*1*Click here to check the communication between the selected OSD-device and the computer -> GREEN = OK 
Once the communication between OSD-device and computer is established, project bar, section data and observation text are displayed as soon as the user hits the corresponding buttons.
231Section data31 
2ObservationProject bar 
...