...
Quick Guide
The quick guide is giving you a quick overview of the basic work flow operators must know to get a report that contains the most important inspection data
...
The picture is copied automatically into the sub-folder Picture\Sec or Picture\Nod within the current project.
Connection to OSD device
...
Check the OSD-settings in order to be able to control the display of various text parts as project bar, section data (object data) and values directly provided by OSD-objects (date, time, inclination, distance…) directly from the WinCan software: 32*1*Click here to check the communication between the selected OSD-device and the computer -> GREEN = OK 
...
Once the communication between OSD-device and computer is established, project bar, section data and observation text are displayed as soon as the user hits the corresponding buttons.
231Section data31 
2ObservationProject bar 
:
...
Assigning Project
...
Particpants
Select the command Projects > Project Participants to open the address panel: the left part is subdivided into three address categories: right click into each category or hit the button 
to create a new address and enable the check box to assign a specific address to the current project:
1 
The right part of the panel allows the user to manage a list of operators, cameras and trucks, which can then be selected directly from the corresponding fields within the inspection panel (page 9).
Client, manager and contractor addresses that have got a check mark will be printed on the project information page. So always make sure you properly assigned the addresses to the current project before you print the whole report.
The contractor panel provides an additional command button to set the currently selected address as the default contractor (1).
This address is going to be assigned automatically to future projects.
To change the contractor's logo simply double-click on the address, go to the logo line in the address input mask and click on the grey square button. This is going to open a Windows dialogue where you can browse for corresponding logo file:
Finally hit the button 
to save your changes.
Each address you create is saved to the file WCMETA.sdf, which is located in the installation folder C:\Users\Public Documents\CDLab\Common\Ressources\sqlCE.
The addresses you have just assigned to the current project are saved to the file [project name]_Meta.sdf which you can find in the project folder DB.
...