...

Hitting the button Settings provides a list of categories that contain configuration options you will have to check or uncheck accordingly. All categories are described below together with their most important options.

...

The last tab that exists and should be known by every user is called “Settings” (Figure 41). This is a place where the user is able to set all the values connected with the ProTouch application. All of the settings has been splited into sections and subsections to make the navigation easier.

...

Last section allows the user to provide the activation code – it is very important at the first start.

OSD (On Screen Display):

WinCan ProTouch has got a full support for the OSD. It gives a possibility to add text onto the video stream in both ways – using dedicated hardware or software itself. All the settings connected with this module are available in the settings tab. The user is able to get there from the home screen using the corresponding buttons. From the settings page the user is able to get into the OSD tab (Figure 28). This is a connection configuration page.

...

General > Options:

General > Language:

...

Auto naming:

...

Video > Video Source:

...

Video > OSD Device:

WinCan ProTouch has got a full support for the OSD. It gives a possibility to add text onto the video stream in both ways – using dedicated hardware or software itself. All the settings connected with this module are available in the settings tab. The user is able to get there from the home screen using the corresponding buttons. From the settings page the user is able to get into the OSD tab (Figure 28). This is a connection configuration page.

The user gets a set of predefined values – OSD objects, panels and all the settings are prepared to be used out of the box. The only thing that has to be done is a device selection. The user has to select the desired device and the connection properties. The dropdown with “---” lists the COM ports with available devices and the settings icon allows to get into the connection parameters. If there is no parameters available this option will not be available.

...

Device Control:

...

WinCan Web:

...

Updates:

Licence:

Last section allows the user to provide the activation code – it is very important at the first start.

Help:

The last tab that exists and should be known by every user is called “Settings” (Figure 41). This is a place where the user is able to set all the values connected with the ProTouch application. All of the settings has been splited into sections and subsections to make the navigation easier.

...

Creating projects

In the ProTouch application the is a possibility to create a project. It can be done in two ways:

...