...
Once the camera is connected to a compatible video encoding device (i.e. Sensoray 2253, Dazzle DVD-Videorecorder or DFG/USB2pro etc.) and switched on the video LiveVideo signal appears in the preview panel and the camera thus is ready for recording:
...
Encoding devices that are recognized in the WINDOWS device manager can automatically be selected in ProTouch.
Video > OSD Devices:
The user gets a set of predefined values – OSD objects, panels and all the settings are prepared to be used out of the box. The only thing that has to be done is a device selection. The user has to select This sub-category provides a list of OSD-devices that are currently supported by ProTouch. Select the desired device and the connection properties. The dropdown with “---” lists the COM ports with available devices and the settings icon allows to get into the connection parameters. If there is no parameters available this option will not be available.
...
corresponding COM-port which the device is connected to:
...
Device Control:
...
WinCan Web:
...
When the recording is finished the user is able to get back to the project overview screen.
OSD Panel
The user gets a set of predefined values – OSD objects, panels and all the settings are prepared to be used out of the box. The only thing that has to be done is a device selection.
WinCan ProTouch has got a full support for the OSD. It gives a possibility to add text onto the video stream in both ways – using dedicated hardware or software itself. All the settings connected with this module are available in the settings tab.
...