...
Abstract
How to understand what the different layers and displays are in the WinCan 3D Application.
Author
...
Page Contents
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
...
Introduction
The WinCan 3D Application renders geometric objects in a user friendly way that allows the data to be easily navigated in any orientation.
...
Brown - this is the pipe, the section and it is rendered at the dimensions specified in the VX project data, 400mm diameter in this case.
Blue - this is WKT string of the inspection, which is the pure geometric line that is stored in the WinCan VX database. It is rendered as a tube with a nominal system diameter, but it is not really a tube, just a line string, but it allows us to see the pure object and how it is position at the bottom of the pipe in all cases. The reason for this is because drainage dimensions are always calculated this way by engineering design, because this is where the water flows.
...
The Lateral Connection
Let’s look more closely at the lateral connection. In this case, the lateral is plotted at 2 o’clock in an upstream TV inspection from the section lower node, and the lateral defined as 150mm diameter. The lateral was created automatically by WinCan VX.
...