| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Activate Flex mode per user
If you purchased the WinCan Web Flex (seats), you must assign the flex mode to the desired user in your WinCan Web environment.
...
Select the user who should have the right to use the flex mode
Use the edit option
Set the checkbox “Flex mode” and save
...
| Info |
|---|
WinCan The Flex mode can be acquired only per user and year. There is only one instance per user allowed . It will not be possible to use the same account concurrent for the same so you won’t be able to run it on several machines at the same time. |
WebFlex allows the user to modify uploaded projects DIRECTLY on the cloud. Therefore he will need an additional license option as shown below:
...
Once activated, WEBFLEX WebFlex allows you to create new or edit and delete existing SECTION, INSPECTION and OBSERVATION data as if you would enter them in WinCanVX.
Data Entry
Click on the menu button (2) at the right of each section which is listed in the overview and select the command Edit section:
...
5.) Hit the button Go Back (1) if you want to quit the defect catalogue without saving the current observation:
...
Data Output
You may even create a PDF report directly on the CLOUD using the command Project > Reporting (1 and 2). Next select the desired report pages (3) and finally hit the button Generate Report (4):
...