...
The software for the easy assessment of pipe inspection data on mobile workstations
User Manual
Version 2.1
Date 09.08.2022
...
Windows 8.1 PRO, 64bit: all updates provided by Microsoft must be downloaded and installed.
Windows 10 PRO, 64bit: all updates provided by Microsoft must be downloaded and installed.
Windows 11 PRO, 64bit: all updates provided by Microsoft must be downloaded and installed.
...
Download the software installation package under www.wincan.com\Downloads and double-click on the installation file ProTouch_SETUPProTouchSetup.exe to run the installation. Confirm all the steps given by the installation wizard hitting the button Next accordingly.
...
This sub-category provides a list of OSD-devices that are currently supported by ProTouch. Select the desired device and the corresponding COM-port which the device is connected to:
...
Device Control:
A precise description of this sub-category will follow…These settings allow to choose correct ProTouch Api Panels type.
WinCan Web:
Enter your credentials for the usage of the cloud service WinCan WEB. Mind that you have to register your company and your web-account before under web.wincan.com.
...
Hitting the blue button Create is going to generate the corresponding project structure in the background and switches to the Project Start Screen which is shown below. Hitting the button Project data entry Overview then opens the interface for section and inspection data entry:
...
When you enter a new observation afterwards, all open continuous defects will be listed inside a separate field (1) below the observation catalogue. Simply highlight the desired continuous defect, complete the observation picking the list item Finish (2) and finally confirm the observation entry (3):
...
Observation entry based on a LiveVideo signal allows the user to control the text display if the corresponding text generator of the camera equipment is supported by ProTouch. Click on the main button OSD, then select the command button OSD -Panelpanel to get the most important text display control buttons shown below the video screen:
...
Enter a part of a project name into the search field and run the search process via the magnifier iconcorresponding project will be shown on the list. The rest of projects will be filtered out.
Update project list: invalid entries to deleted projects will be removed and the project list thus cleaned up.
Create a new project
Open an existing project from the list
Add a project to list, that you have previously copied into the folder C:\WinCan_Projects. Therefore you always must browse for the project database in the project sub-folder \DB an (e.g. Test_ProTouch_EN.db3).
Copy a project to a removable drive
Rename the selected project
Delete the project from the list
...
1.) Enter a part of a contact name into the search field and run the search process via the magnifier iconcorresponding contact will be shown on the list. The rest of contacts will be filtered out.
2.) Click on this button to create a new address.
...
5.) Select and edit an address from the list. Use the input mask (contact details) on the right to modify the current contact or select a specific contractor address to assign the logo file via the corresponding text field (6. 6). To delete the attached logo to the contact the user needs to select contact from the list and click on the trash icon on the right of the logo name under the Logo File field.
7). To delete the contact the user needs to select it from the list and click on the trash icon in on the right of contact details bar.
| Note |
|---|
Mind that you cannot restore contacts which have been deleted previously! |
...
You can assign contacts to existing projects via the contact management, remember that the project must be active: select the desired contact (1) and hit the button Append (2) to link it to the current project:
...
2.) Create a report preview via the standard menu (1) ans and save the protocol as a PDF file hitting the corresponding button (3):
...