...
Whats the difference or the advantage of using the SmartPhone ANDROID App WinCan Mobile or and manually entering and recording manhole data via the pipe inspection software WinCanVX?
...
The usage of WinCan Mobile App always requires a WinCanWeb account with the FLEX mode activated. Once the account data are saved on your mobile device (SmartPhone or tablett computer) you can create a project, enter manhole data, link video clips and photos to each manhole and finally upload it to your workspace on the WinCan CLOUD.
...
1.) Run the Mobile App, go to Setting sand Settings and check your Web account data (i.e. username and password)
...
Manhole name
Town
Street
Date of inspection
Name of the operator
Cover shape
Cover diameter and width
Manhole entries: type (inlets and outlets) and clock position
4.) Take 2 3 or 3 4 photos per manhole:
Photo of the manhole and its surroundings (for easier localization)
Photo of the manhole cover
Photo of the manhole taken from the cover level (0.00 m)
Photo of the manhole bottom
5.) Record a one video clip (app. 30 sec) per manhole
6.) Upload the project
Refer to the documentation for more details
Data recording with QV360 camera from iPEK
It is recommended this job is done by 2 operators
1.) Run the Mobile App, go to Settings and check your Web account data (i.e. username and password)
2.) Save your settings and hit the button devices and enter Bluetooth and camera serial number into the corresponding text field. You can get both serial numbers form your personal WebCloud Voucher:
...
3.) Create a project based on the damage assessment standard which is mainly used in your country
4.) Enter at least the following data for each manhole:
Manhole name
Cover diameter and width
Position of the manhole (X and Y coordinate values)
5.) Take 2 photos for each manhole
Photo of the manhole and its surroundings (for easier localization)
Photo of the manhole cover
6.) Hit the button Devices>Connect to connect to the QV360 device
| Note |
|---|
Make sure your the camera stick has been extended to the manhole depth and that the laser dot of the camera points to the center of the manhole bottom. Mind that the camera stick is moved vertically, steadily and slowly from the cover level to the bottom. |
7.) Select the manhole and hit the button QV360 to start recording:
8.) Click on Preview to set the start point of recording; mind the cover ring appears on app. 75% of the image height.
9.) Set the luminosity slider to 75% or higher
10.) Hit the button Run Inspection, slide down the camera stick and mind the state of the information panel that flashes up on the WinCan Mobile App:
MOVE → movement OK
SLOW → slow down movement
STOP → recording finished → slide up the camera stick
11.) Switch to the list of manholes and hit the button MediaFiles
12.) Play back the video clip of the currently recorded manhole
Refer to the documentation for more details