...
Manhole Data Entry on Mobile Devices with WinCan MobileApp
| Table of Contents | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
Data recording with built-in camera of SmartPhone or tablet computer
1.) Run the Mobile AppMobileApp, go to Settings, select your country and check your Web account data (i.e. username and password). Next click on Save settings and hit the command Back:
...
2.) Create a project based on the damage assessment standard which is mainly used in your country/region
...
3.) Enter at least the following data for each manhole. Hit the arrow icon to the right to open or close the corresponding data input mask:
Manhole name
Manhole depth (measured from cover to bottom)
Town
Street
Date of inspection
Name of the operator
Cover shape
Cover diameter and width
...
Manhole entries: type (inlets and outlets) and clock positioninlet or outlet), clock position and drop. Hit the button From sketch to set the clock position of the inlet or outlet. Set the main outlet at the position 12 or 6 o’clock:
...
Position of the manhole: the coordinates are provided by the GPS receiver of the mobile device (SmartPhone or tablet computer). Move Hit the button Set location, move the mobile device (green icon) to the center of the manhole and confirm the current position hitting the button set current as node position: a red icon then shows the manhole position. Finally hit the SAVE button to return to the data entry mask.
...
4.) Manholes without defects: take 3 or 4 photos per manhole:
...
6.) Record one video clip (app. 30 sec) per manhole
...
Data transfer
Go to Settings>Login Settings > Login, enter the user credentials for your Web account and save the settings.
Switch Go back to the project list, select the desired project and hit the cloud icon.
Next hit the Push Upload button to have the project uploaded to the WinCan CLOUD: a user friendly display is going to inform the user continuously about the upload progress which is particularly important in case of large manhole projects.
...
Launch your Internet browser and log in with your Web account.
Check whether all manholes have been uploaded together with the corresponding video clips and photos. In case of large manhole projects it can last more than an hour until the videos can be played back.
...
1.) Run the Mobile App, go to Settings, select your country and check your Web account data (i.e. username and password). Finally save your settings.
2.) Save your settings and hit Hit the button Devices and enter Bluetooth and as well as the camera serial number into the corresponding text field. You can get both serial numbers form your personal WebCloud Voucher:
...
:
...
| Info |
|---|
Important note for resellers: In case you want to test several QV360-cameras for different customers, always log in with your personal DEMO account (ADMIN mode) and manually type the corresponding camera serial numbers. Never scan the QR Code on the Web Cloud Voucher! Contact WinCan, Switzerland to have the ADMIN mode activated for your DEMO account. |
3.) Create a project based on the damage assessment standard which is mainly used in your country (WRC, PACP, WSA, NZPIM etc.)
4.) Enter at least the following data for each manhole:
Manhole name
Manhole depth (measured from cover to bottom)
Cover diameter and width
Position of the manhole: the coordinates are provided by the GPS receiver of the mobile device (SmartPhone or tablet computer). Move Hit the button Set location, move the mobile device (green icon) to the center of the manhole and confirm the current position hitting the button set current as node position: a red icon then shows the manhole position. Finally hit the SAVE button to return to the data entry mask.
...
7.) Select the manhole and hit the button QV360 to start recording:
| Note |
|---|
Make sure the camera stick pole has been extended to the manhole depth and that the laser dot of the camera points to the center of the manhole bottom.Mind that the camera stick is moved vertically, steadily and slowly from the cover level to the bottom. |
8.) Click on Preview to set the start point of recording; mind the cover ring appears on app. 75% of the image height.
...
9.) Set the luminosity slider to 75% or higher
10.) Hit the button Run Inspection, slide down the camera stick pole and mind the state of the information panel that flashes up on the WinCan Mobile App:
MOVE → movement OK
SLOW → slow down movement
STOP → recording finished → slide up the camera stick
| Note |
|---|
Mind that the camera pole is moved vertically, steadily and slowly from the cover level to the bottom |
11.) Switch to the list of manholes and hit the button MediaFiles
...