...
Manhole Data Entry on Mobile Devices with WinCan MobileApp
| Table of Contents | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Introduction
Data entry for manholes can be done via the pipe inspection software WinCanVX or the WinCan MobileApp running on mobile devices.
...
10.) Hit the button Run Inspection, slide down the camera pole and mind the state of the information panel that flashes up on the WinCan Mobile App:
MOVE → movement OK
SLOW → slow down movement
STOP → recording finished → slide up the camera stick
| Note |
|---|
Mind that the camera pole is moved vertically, steadily and slowly from the cover level to the bottom |
11.) Switch Go back to the manhole list of manholes and hit the button MediaFiles
...
12.) Play back the video clip of the currently recorded manholecurrent manhole to make sure there is a clip available. Check the video quality and repeat the inspection if necessary.
Data transfer
Go to Settings>Login Settings > Login, enter the user credentials for your Web account and save the settings.
Switch Go back to the project list, select the desired project and hit the cloud icon.
Next hit the Push Upload button to have the project uploaded to the WinCan CLOUD: a user friendly display is going to inform the user continuously about the upload progress which is particularly important in case of large manhole projects.
...
Launch your Internet browser and log in with your Web account.
Check whether all manholes have been uploaded together with the corresponding video clips. In case of large manhole projects it can last more than an hour until the videos can be played back.
...
Data processing based on the video clip runs automatically after upload. Hit the button Project>AI scan jobs to follow the progress in a separate panel:
...
Once the AI scan jobs have finished, hit the menu button to the right of the desired manhole record and select the command Edit node:
...
Left to the data entry mask there will be available 3 different views for each manhole:
360° video view
...
3D view of the manhole structure. Use this view to measure the dimensions of the manhole and its parts (cover, cone, chamber, channel etc.)
...
2D view of the unfolded manhole wall. Use this view to measure the dimensions of the manhole parts and to clearly detect any kind of defect.
...
| Info |
|---|
Printing of the manhole inspection reports |
...
is always done in the CLOUD. |
...
Mind that the 3D structure and the unfolded wall of the manhole can currently not be printed on a PDF report page! |
Refer to the documentation https://cdlabdev.atlassian.net/l/cp/0Y1nTori for more details
...