...
Manhole Data Entry on Mobile Devices with WinCan MobileApp
Version: 2.2
Date: 10.12.2024
...
Position of the manhole: the coordinates are provided by the GPS receiver of the mobile device (SmartPhone or tablet computer). Hit the button Set location, move the mobile device (green icon) to the center of the manhole and confirm the current position hitting the button set current as node position: a red icon then shows the manhole position. You can still move the red icon to adjust the manhole position keeping the finger on the desired location. Finally hit the SAVE button to return to the data entry mask.
...
| Info |
|---|
Printing of the manhole inspection reports can be done directly in the CLOUD. If you prefer to print your survey protocol with the software WinCan VX you may also download the whole project on your local hard drive and open it with a licensed version of WinCanVX. |
...
. |
Data recording with QV360 camera from iPEK
...
Manhole name
Town
Street
Date of inspection
Cover shape
Cover diameter and width
Position of the manhole: the coordinates are provided by the GPS receiver of the mobile device (SmartPhone or tablet computer). Hit the button Set location, move the mobile device (green icon) to the center of the manhole and confirm the current position hitting the button set current as node position: a red icon then shows the manhole position. You can still move the red icon to adjust the manhole position keeping the finger on the desired location. Finally hit the SAVE button to return to the data entry mask.
...
12.) Slide down the camera pole vertically, steadily and slowly from the cover level to the bottom and mind the state of the information panel that flashes up in the WinCan Mobile App:
...
MOVE → movement OK
SLOW → slow down movement
STOP → recording finished → slide up the camera stick
...