...
Manhole Data Entry on Mobile Devices with WinCan MobileApp
Version: 2.6
Date: 31.03.2025
...
Position of the manhole: the coordinates are provided by the GPS receiver of the mobile device (SmartPhone or tablet computer). Hit the button Set location, move the mobile device (green icon) to the center of the manhole and confirm the current position hitting the button set current as node position: a red icon then shows the manhole position. You can still move the red icon to adjust the manhole position keeping the finger on the desired location. Finally hit the SAVE button to return to the data entry mask.
...
Prior to the device launch, the identification numbers on the camera head (Bluetooth and camera serial number) must be registered and assigned to your web account. Simply scan the QR-code on your personal Web Cloud voucher for that purpose:
...
Important note for resellers:
Never scan the QR-Code on the Web Cloud voucher, which is reserved for the customer!
In case you want to test several QV360-cameras for different customers, always log in with your personal DEMO account (ADMIN mode) and manually type the corresponding camera serial numbers. Contact WinCan, Switzerland to have the ADMIN mode activated for your DEMO account.
Pairing the camera to the SmartPhone or tablet computer
...
3.) Select the camera from the list of available devices and enter the PIN-Code 123123 in the Bluetooth pairing prompt that pops up:
...
Working with the camera
It is recommended that this job is done by 2 operators:
...
4.) Go back to the MobileApp, hit the button Connect and mind the wireless connection icon that should switch from RED to WHITE: the MobileApp is now ready to receive the camera signal.
5.) Create Go back to the project list and create a project based on the damage assessment standard which is mainly used in your country (WRC, PACP, WSA, NZPIM etc.).
...
Manhole name
Town
Street
Date of inspection
Cover shape
Cover diameter and width
Position of the manhole: the coordinates are provided by the GPS receiver of the mobile device (SmartPhone or tablet computer). Hit the button Set location, move the mobile device (green icon) to the center of the manhole and confirm the current position hitting the button set current as node position: a red icon then shows the manhole position. You can still move the red icon to adjust the manhole position keeping the finger on the desired location. Finally hit the SAVE button to return to the data entry mask.
...
11.) Slide down the camera pole vertically, steadily and slowly from the cover level to the bottom and mind the state of the information panel that flashes up in the WinCan Mobile App:
...
MOVE → movement OK
SLOW → slow down movement
STOP → recording finished → slide up the camera stick
...