...
3D-Measurement of the Pipe Geometry with Geo-Sensors
Version: 2.4
Date: 17.08.2023
| Table of Contents |
|---|
Introduction
A new generation of pipe inspection cameras allow the operator to record the exact position, situation and the course of a pipeline directly during a standard survey: der camera crawler thus drives through the pipe whereas a built-in geo-sensor is recording the current coordinate position of the camera head in predefined short distance steps. The corresponding X-, Y- and Z-values then are sent directly to the computer, processed by WinCanVX and drawn by the VX modules Map und WinCan 3D.
...
If either the hardware configuration or the the hardware itself is faulty, the measurement wizard will return a corresponding feed-back.
...
It is crucial for a reliable calculation of the 3D pipeline network, that you have entered valid data into all the corresponding altitude/depth fields of the section and node category:
Pipe depth in the upstream manhole (from cover to pipe bottom) (SECTION.OBJ_FromNodeDepth)
Pipe bottom altitude (above sea level) in the upstream manhole (SECTION.OBJ_FromNodeInvert)
Pipe depth in the downstream manhole (from cover to pipe bottom) (SECTION.OBJ_ToNodeDepth)
Pipe bottom altitude (above sea level) in the downstream manhole (SECTION.OBJ_ToNodeInvert)
Manhole cover altitude above sea level (Z-Coordinate) (NODE.OBJ_Shape_WKT_Z)
Depth of the upstream/downstream manhole (from cover to bottom) (NODE.OBJ_DepthToInvert)
Bottom altitude above sea level of the upstream/downstream manhole (NODE.OBJ_NodeInvert)
The sketch below illustrates the meaning of these fields:
...
Legend:
Green = values to be provided by engineers/water authorities
Brown = values to be measured by the operator or provided by engineers/water authorities
Blue = values to be measured by the operator
Red = values calculated by WinCanVX hitting the button Tools > Calculate Invert Levels
Running 3D measurement for main pipes
...