Versions Compared

Old Version 5

changes.mady.by.user Beat Schneuwly (Unlicensed)

Saved on

compared with

New Version Current

changes.mady.by.user Daniel Steiner

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...



WinCan DigiSewer
Troubleshooting




Version: 1.1
Date: 06.02.2017

...

  • The MultiUSB configuration panel opens and allows you to check the device mode (1), the COM-port (2) the input channel for inclination (3) as well as the distance unit (4):

3241

  1. According to the device, that has been connected the user has to select the appropriate mode:

...

  • Distance and inclination from MultiUSB: for the iPEK-devices DE03 and DE08

  • Distance from MultiUSB, inclination from OSD: for the iPEK-devices DE03 and DE08

  • OSD only (without MultiUSB): for the iPEK-devices DCX and VC200 (VisionControl)

  1. In case the device communication works via a RS232 connection, select the appropriate COM-port.

  2. Verify the signal type for inclination measurement: AD = analogical; CAN = digital

  3. Verify the unit for distance measurement: [feet] for US; [meter] for any other country

  • In case the device communication works via a MultiUSB connection, run the application C:\Program Files\WinCan v8\WinCan\MultiUSBDiag.exe (Version from 2010 or higher!) to test its functionality:

...