Osprey-100; Device Settings

Make sure you use a specific (older) version of the ffdshow driver https://app.box.com/s/l1a89av4hlwwfd1leocdp4m0qde1cpfs to have the Osprey video capture card properly operated with WinCanVX.

Do NOT use the latest version of the ffdshow driver.

The basic settings for this card must be set in WinCanVX as depicted below under Home>Settings>LiveVideo:

Open

The following additional configuration settings must be done in the ffdshow settins panel. Especially change the highlighted values in the category Output in case of timing problems:

Open