/
Sensoray 2253; text display for section data

Sensoray 2253; text display for section data

Question/Problem:

Text display is controlled by the device Sensoray 2250. However the section data are not completely shown on the screen as set under Home>Settings>OSD>Object data:

Answer/Solution:

The device Sensoray 2253 currently only supports a maximum of 11 lines for section data display.

  • Check the settings for section/object data display: keep line 4 empty

  • Set observation text display on line 4

  • Confirm these settings and close WinCan VX

  • Open the file C:\Users\Public\Documents\CDLAB\WinCanVX\ini\WinCanCOMMDevices_V4.ini

  • Add the command lines highlighted below:

Open WinCan VX and make sure the device Sensoray 2253 is selected:

Confirm the settings, hit the camera button in the video panel and click on the OSD control button Section data: the text display for section data is shown as expected:

 

 

Related content

IBAK SoftControl, Functionalities
IBAK SoftControl, Functionalities
Read with this
MiniCam; text display
MiniCam; text display
More like this
Sensoray 2253; Device Settings
Sensoray 2253; Device Settings
Read with this
Printing in WinCan VX
Printing in WinCan VX
More like this
Program Settings
Program Settings
Read with this
Controlling Text Display
Controlling Text Display
More like this