How to access the project on WEB Flex

 Instructions

  1. Login to Your WinCan WEB Flex account

  2. Find Your QV360 project and open it

  3. Play the 360° video - move, zoom, pan

  4. Open 3D Reconstruction model

    1. Click on ellipsis next to the manhole details

    2. Select “Show 3D reconstruction“

  5. Move around the model, pan, zoom in and out

  6. Access measuring tool

    1. Right click on any point on the 3D model

    2. Select “Measure distance“

    3. Select two points on 3d model to measure the distance between them

    4. Click on the red line for a selected measurement to access additional options

      1. Press “copy” button to copy the measured value

      2. Press “delete“ button to delete this measurement

  7. Open 3d reconstruction settings

    1. Click on settings button in the top right corner

    2. Select Measurement units and brightness

  8. Open Unfolded view

    1. Click on ellipsis next to the manhole details

    2. Select “Show unfolded view“

  9. Access measuring tool

    1. Right click on any point on the Unfolded View

    2. Select “Measure distance“

    3. Drag the mouse from the start point to the end point to measure the distance

    4. Click on the red line for a selected measurement to access additional options

      1. Press “copy” button to copy the measured value

      2. Press “delete“ button to delete this measurement

  10. Change the clock position

    1. Right click on any point on the Unfolded View

    2. Select “Set clock“

    3. Move the blue line to the desired position

    4. Enter desired clock position

  11. Change the distance

    1. Right click on any point on the Unfolded View

    2. Select “Set distance“

    3. Move blue and red line to the desired position

    4. Enter desired distance

  12. Shift the image

    1. Right click on any point on the Unfolded View

    2. Select “Shift the image“

    3. Drag Your mouse to shift the image

  13. Create node parts

    1. Right click on any point on the Unfolded View

    2. Select “Node part auto measurements“

    3. Move two yellow lines to the desired position

    4. Choose the node part

    5. Node part is added to the Node details with height value already filled

  14. Rotate the scale on Y axis

    1. Right click on any point on the Unfolded View

    2. Select “Rotate the scale on Y axis

  15. Create Observations on Unfolded view

    1. Right click on any point on the Unfolded View

    2. Select “Draw rectangle“ or “Draw circle lateral“

    3. Mark the selected observation

    4. Find this observation on the 360° video

    5. Enter observation code

    6. Select node part

    7. Capture a photo

    8. The observation will be created and will be visible both in the unfolded view and in the observation list on the main project view

 Example