...
Page Contents
| Table of Contents | ||
|---|---|---|
|
...
Introduction
WinCan VX includes tools to make 3D measurements of pipes and convert them into object shapes in the GIS space. This is very useful to clients requiring a detailed view of where their pipes are located and what shape they are, particularly for those making upstream TV inspections of laterals from section main pipes.
...
Please discuss with your local WinCan regional office where training is required.
...
Types of 3D Measurement
3D measurements can be made in WinCan VX or with or without TV inspections. There is no requirement to have one of these with the other and there is no link between the directions of TV inspections and 3D measurements.
...
Inspection Direction | Setup Node | Measurement Direction |
|---|---|---|
None, no TV inspection | Upper | Forwards |
None, no TV inspection | Upper | Backwards |
None, no TV inspection | Lower | Forwards |
None, no TV inspection | Lower | Backwards |
Downstream, with TV inspection | Upper | Forwards |
Downstream, with TV inspection | Upper | Backwards |
Upstream, with TV inspection | Lower | Forwards |
Upstream, with TV inspection | Lower | Backwards |
...
Licensing
To make 3D measurements, the user must have a valid WinCan VX Expert license and also the 3D Measurement license slot, included by default in the most recent versions of the VX Expert package.
...