Open

Page Contents

Introduction

WinCan VX includes tools to make 3D measurements of pipes and convert them into object shapes in the GIS space. This is very useful to clients requiring a detailed view of where their pipes are located and what shape they are, particularly for those making upstream TV inspections of laterals from section main pipes.

These tools can be used in any standard provided the correct VX licensing is installed on the customer’s PC.

Navigating and understanding 3D geometry is complex and requires an excellent knowledge of the 3D geo-space. While we try to make this as simple as possible, we cannot get away from this requirement to know how to use WinCan VX and WinCan Map at the very highest levels.

Please discuss with your local WinCan regional office where training is required.

Types of 3D Measurement

3D measurements can be made in WinCan VX or with or without TV inspections. There is no requirement to have one of these with the other and there is no link between the directions of TV inspections and 3D measurements.

The result of this is that we can have any of the following scenarios with a section or a lateral in WinCan VX when we are making a 3D shape:

Licensing

To make 3D measurements, the user must have a valid WinCan VX Expert license and also the 3D Measurement license slot, included by default in the most recent versions of the VX Expert package.

Back to the top.