Problem/Question
...
Table | Field | Meaning |
SECTION | OBJ_SortOrder | Section counter: this value is automatically renumbered when sections are deleted |
SECTION | OBJ_Key | Section name: this field must contain a unique name to identify the pipe section located between the US and DS manhole |
SECTION | OBJ_Length | Length of the whole section in [m] OR [ft] |
SECTION | OBJ_Type | Type of pipe line: section (main pipe) or lateral |
SECTION | OBJ_City | Name of the city/town |
SECTION | OBJ_Street | Name of the street |
SECTION | OBJ_FromNode_REF<-Node.OBJ_Key | Name of the Upstream (US) manhole |
SECTION | OBJ_ToNode_REF | Name of the Downstream (DS) manhole |
SECTION | OBJ_FromNodeDepth | Depth of the pipe connection, measured from US manhole cover (used in 3D) |
SECTION | OBJ_FromNodeInvert | Altitude of the US manhole bottom above sea level (used in 3D) |
SECTION | OBJ_ToNodeDepth | Depth of the pipe connection, measured from DS manhole cover (used in 3D) |
SECTION | OBJ_ToNodeInvert | Altitude of the DS manhole bottom above sea level (used in 3D) |
SECTION | OBJ_FromNode_REF<-Node.OBJ_NodeType | Type of node/connection: manhole, connection, building |
SECTION | OBJ_System | Function of the node: manhole, lamphole, rodding eye etc. |
SECTION | OBJ_Situation | Description of the surroundings of the section |
SECTION | OBJ_SectionType | Type of the sewer (gravity, pressure) |
SECTION | OBJ_Usage | Use/purpose of the sewer (storm water, waste water, combined etc.) |
SECTION | OBJ_Shape | Shape of the pipe (circle, rectangle, oval) |
SECTION | OBJ_Size1 | Diameter/height of the pipe; [mm], [inch] |
SECTION | OBJ_Size2 | Width of the pipe; [mm], [inch] |
SECTION | OBJ_Material | List of different pipe materials |
SECTION | OBJ_ConstructionDate | Year of construction |
SECTION | OBJ_Memo | General remark to the section |
SECINSP | SI_InspName | Name/Number of the survey (will mostly be set automatically). This field must NEVER be empty |
SECINSP | INS_Operator_REF | Link to the operator name |
SECINSP | INS_Equipment_REF | Link to the list of the vehicles used for section surveys |
SECINSP | INS_Camera_REF | Link to the list of the cameras used for section surveys |
SECINSP | INS_StartDate | Date of the beginning of the inspection |
SECINSP | INS_StartTime | Time of the inspection beginning |
SECINSP | INS_EndTime | Time of the inspection termination |
SECINSP | INS_InspectionDir | Inspection direction (WITH or AGAINST the flow). This field must NEVER be empty |
SECINSP | INS_PhotoRef | DVD N°: value automatically set for every section during a ViewerExport. Important for creation of a DVD box cover |
SECINSP | INS_Cleaned | Pipe section previously cleaned: YES / NO |
SECINSP | INS_Weather | Weather conditions during the inspection |
SECINSP | INS_Method | Camera technology: crawler, push camera etc. |
SECINSP | INS_Purpose | Reason of inspection: general survey, rehab. survey |
SECINSP | INS_PhotoRef | N° of storage medium set autom. during data distrib. |
SECINSP | INS_Memo | General remark to the survey |
SECOBS | OBS_SortOrder | Observation counter: this value is automatically renumbered when observations are deleted |
SECOBS | OBS_Distance | Position ([m] or [ft]) of the section observation measured from inspection start node |
SECOBS | OBS_DistanceToGo | Position ([m] or [ft]) of the section observation measured from inspection end node |
SECOBS | OBS_OpCode | Display of observation code (letter code) linked to the corresponding observation text |
SECOBS | OBS_Observation | Entry of observation text via country specific damage catalogues for sections (double click) |
SECOBS | OBS_RateValue | Entry of damage grades |
SECOBS | OBS_GradeS | Calculation of structural damage grades |
SECOBS | OBS_GradeO | Calculation of operational/service damage grades |
SECOBS | V_OBS_Picture1 | Taking the 1st picture of an observation (double click) |
SECOBS | V_OBS_Picture2 | Taking the 2nd picture of an observation (double click) |
SECOBS | V_OBS_Clip | Recording of video clip(s) of the current section (double click) |
SECOBS | OBS_LateralSection_REF | Recording of satellite sections (lateral sections) linked to the current main section (double click) |
SECOBS | OBS_TimeCtr | Displaying the MPEG timecode of the current observation |
SECOBS | V_OBS_Scan | Import data from a pipe scan (DigiSewer, Panoramo, RPP) and launch the ScanExplorer module |
SECOBS | V_OBS_LaserScan | Run the LaserScan module for pipe deformation measurement (RingLaser, MultiLaser) |
SECOBS | OBS_Memo | Special remark to the current observation |
NODE | OBJ_Key | The values entered into the section fields OBJ_FromNod_REF or OBJ_ToNode_REF are automatically transferred into this field |
NODE | OBJ_NodeType | Type of the node/connection: manhole, connection point, building |
NODE | OBJ_System | Function of the node: manhole, lamphole, rodding eye etc. |
NODE | OBJ_City | Name of the city/town |
NODE | OBJ_Street | Name of the street |
NODE | OBJ_Situation | Description of the surroundings of the manhole |
NODE | OBJ_DepthToInvert | Depth of the manhole from cover level in [m] or [ft] |
NODE | OBJ_NodeInvert | Altitude of the manhole bottom (invert level) above sea level |
NODE | OBJ_Point_REF | Altitude of the manhole cover ([m]/[ft] above sea level |
NODE | V_OBJ_Shape_WKT_X | X-coordinate of the manhole (used in MAP and 3D) |
NODE | V_OBJ_Shape_WKT_Y | Y-coordinate of the manhole (used in MAP and 3D) |
NODE | V_OBJ_Shape_WKT_Z | Z-coordinate of the manhole (i.e. cover altitude, used in 3D) |
NODINSP | INS_StartDate | Date of the manhole survey |
NODINSP | INS_StartTime | Start time of the manhole survey |
NODINSP | INS_EndTime | End time of the manhole survey |
NODINSP | INS_RadialRef | Horizontal reference point for setting the clock position of the in- and outlets |
NODPART | NOP_Type | Description of the manhole part: |
NODPART | NOP_InsertType | Cone type: conical centered, conical off centered… |
NODPART | NOP_Shape | Shape: cover, shaft, chamber |
NODPART | NOP_Size1 | Diameter/Length: cover, shaft, chamber |
NODPART | NOP_Size2 | Width: cover, shaft, chamber |
NODPART | NOP_Height | Height: cover (“thickness”), shaft, cone, chamber |
NODPART | NOP_Material | Material: cover, shaft, cone, chamber |
NODENTRY | NOE_Type | Type of entry: inlet or outlet |
NODENTRY | NOE_ClockPosition | Clock position of the entry in relation to value set in INS_RadialRef (i.e. 6 or 12 o’clock) |
NODENTRY | NOE_Shape | Shape of the inlet/outlet |
NODENTRY | NOE_Size1 | Diameter/Height of the inlet/outlet |
NODENTRY | NOE_Size2 | Width of the inlet/outlet |
NODENTRY | NOE_Drop | Depth of the inlet/outlet, measured from cover |
NODOBS | OBS_Depth | Position ([m] or [ft]) of the manhole observation measured from cover (0 m or 0 ft) |
NODOBS | OBS_OpCode | Display of observation code (letter code) linked to the corresponding observation text |
NODOBS | OBS_Observation | Entry of observation text via country specific damage catalogues for manholes (double click) |
NODOBS | V_OBS_Picture1 | Taking the 1st manhole picture |
NODOBS | V_OBS_Picture2 | Taking the 2nd manhole picture |
NODOBS | V_OBS_Clip | Recording of video clip(s) for the current manhole |
NODOBS | V_OBS_Scan | Import data from a manhole scan and launch the ScanExplorer or the CleverScan module |