...
| Table of Contents | ||
|---|---|---|
|
...
Chapters
| Page Tree | ||||||
|---|---|---|---|---|---|---|
|
...
Preamble
A new generation of pipe inspection cameras allow the operator to record the exact position and the course of a pipeline directly during a standard survey inspection. The camera crawler drives through the pipe and at the same time a built-in geo-sensor is recording the current coordinate position of the camera head in along the path. The corresponding X, Y and Z values then are sent directly to the computer, processed by WinCan VX and drawn by the VX modules WinCan Map und WinCan 3D.
The result of such a measurement finally provides the pipe course of a section with all the left/right deviations and altitude changes as it would look like in reality. It thus completes the classic pipe inspection survey and report.
...
Pre-Requisites
The following minimum PC requirements of hardware and software are required to make 3D measurements with WinCan VX.
Hardware:
Processor - Intel Core i5 or higher.
Graphics Board - NVIDIA GeForce 9 series or higher, with at least two graphic ports (DVI or Display Port) allowing the connection of two monitors.
RAM - 16 GB or higher.
Video Capture Board - VITEC board (PCI or PCI-Express), Mobile Cap 24 (USB) or other WDM based recording device.
TV Camera - Crawler with built-in geo-sensor (iPek 3D, iBak 3D GS or Rausch Latras).
Software:
Operating System - Windows 10 or higher, 64 bit, all updates included.
WinCan VX Application - WinCan VX version 1.2023.15.x or higher.
WinCan Map Application - Real time drawing of the section geometry, based on the coordinate values (XYZ).
WinCan 3D Application - Drawing and 3D-visualisation of the whole pipeline network, based on the coordinate values (XYZ) recorded for each section.
...
WinCan VX Support
For all WinCan VX related support requests please create a Service Desk request with WinCan by clicking here. When making these requests, please be sure to always:
...