Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Licensing

After successful installation of WinCan VX, the user has to activate either a local (license system WinCan) or a server license (license system Distributed license). Both cases require a stable internet connection.

Local License

The following steps describe the licensing process on single-user computers in TV vehicles or offices. Licensing is actually done via an individual license code sent by e-mail (software licensing).

  • Install WinCan VX and launch the software.

  • Activate the license system WinCan via the command General > Manage licences > Select license system:

  • Restart WinCanVX, run the command General > Manage licenses > Update license, and copy your personal activation code into the corresponding text field:

  • The validity of the license is confirmed on the right part of the main interface and all functionalities/modules you purchased are activated from now on your computer.

Server License

If you prefer installing WinCanVX on several CLIENT computers within a local network, the installation of a network license service makes more sense. SERVER and CLIENT computers (PCs oder Notebooks) should therefore be a part of the same subnet. Proceed as described below in order to make full use of this license system:

  • Ask your domain administrator to establish an internal network license service. The instructions needed can be obtained via the link.

WinCan VX License Server: Requirements and Installation

  • Install WinCanVX on all CLIENT computers within the local network.

  • Activate the license system Distributed License via the command General > Manage license > Select license system:

  • Restart WinCanVX, run the command General > Manage licenses > Update license, and type the IP address of the license server into the corresponding text field:

  • A message confirms the validity of the license and activates the WinCan VX modules you will be able to use at least on 5 client computers within the local network. A license extension for 10 to 50 CLIENT computers can be ordered at any time.

License check


License Updates


The license information itself is directly copied to the hardlock. So, after the installation of WinCan VX on different computers, the software can immediately be launched on any of them as soon as you have plugged in the dongle. The software modules activated with that specific license will therefore be available on that PC as well.

Reactivation of the same license on another computer

If you want to detach your license from the current work station (computer 1) in order to be able to use it on another computer, make sure you have an internet connection and run the command Home > Manage License > License settings. Next hit the button Deactivate (2) in the dialogue box that follows:

  • Confirm the corresponding warning message (3).

  • Copy (Ctrl + C) the new license code (4) into a blank TXT file (Ctrl + V) and close the dialogue box.

  • Copy the TXT file to a removable drive and and go to computer 2

  • Plug the removable drive to computer 2, open the TXT file, highlight the activation code and copy it to the clipboard (Ctrl +C)

  • Run the command Home > Manage License > Install/Update license and paste (Ctrl + V) the activation code into the text field as shown in the dialogue below:

  • No labels