Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Next »

For a section and manhole view in map we need to import shape files (shp). The shp files need some mandatory information (coordinates x,y,z, unique section/manhole names) that we can show section and manholes correct in map. Those information you will find in the specification section in this article.

Instructions


Specification

Before GIS-data can be transferred into WinCanVX, each GIS field needs to be mapped or assigned manually to the corresponding WinCan field. The most important section/manhole fields are listed below.

Mandatory fields

WinCan matching field

WinCan Name Description
OBJ_KeySection 

Section/Manhole Name (unique name to identify the section/manhole

OBJ_LengthTotal Length [m]Length of the section (distance from Upstream Manhole to Downstream Manhole)
nodeFromKeyUpstream Node

Name of the Upstream Manhole

nodeToKeyDownstream NodeName of the Downstream Manhole


Optional fields

WinCan matching field

WinCan NameDescription
OBJ_CityTown or Village

Name of the City/Town where the section/manhole is located

OBJ_StreetRoadName of the Street where the section/manhole is located
OBJ_ShapePipe Shape

Shape of the pipe (circular, rectangular, egg-shaped etc.)

OBJ_Size1Dia/Height [mm]Diameter/Height of the pipe [mm] / [inch]
OBJ_Size2Width [mm]Width of the pipe [mm] / [inch]
OBJ_DepthToInvert
Depth of the manhole (distance from cover to bench/channel)
OBJ_MaterialPipe MaterialMaterial of the pipe (concrete, steel etc.)
OBJ_SectionTypeUseType of section (waste water, stormwater, mixed water)
OBJ_UsageUseType of section (replaces OBJ_SectionType in some standards)
OBJ_WasteWaterTypeUseType of section (replaces OBJ_SectionType in some standards)


Example shp file with min required fields



  • No labels