Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

A plugin for the ESRI ArcGIS software which allows a bidirectional communication & interaction between WinCan VX and ArcGIS is available. The main purpose of this tool is:

  • Transfer data from ArcGIS to WinCan VX
  • Detect changes in the header data in WinCan VX and match it with the original data
  • One click to see where a section or manhole is located

This article shows how to install and how to use the WinCan ESRI Plugin (WinCanVXESRIAddIn.exe) (available at http://www.wincan.com/en/downloads/).

Instructions

Step-by-step guide

  1. The Esri ArcGIS Desktop must be installed and licensed
  2. Install the latest WinCan VX ArcGIS plugin.
    1. Start WinCanVXESRIAddin_x_x_x_x.exe 
    2. Confirm Add-In Installation
  3. In order to check whether your WinCan VX Plugin has been installed properly,
    1. A WinCan Tools Toolbar is visible
    2. Open Customize→Add In Manager and if the WinCan ArcGIS Add-In is listed there, it has been installed & detected:





  • No labels