...
Introduction
This documentation describes how drone projects can be prepared in the Flyability Inspector to be imported in WinCan VX.
Requirements
A WinCan VX Expert software licence incl. module/feature 3060 is required for the drone import. This is not activated by default. If you have an Expert licence, contact us at sales@wincan.com with the keyword "drone import". The module will then be activated free of charge.
Title | Requirement | Remark |
|---|---|---|
License | -Expertlizenz wit module/feature 3060 -Only available for Software licenses (no USB dongles) | Email sales@wincan.com with the keyword "drone import". The module will then be activated free of charge. Only valid for expert licences. |
Version | From WinCan VX Version 12.0 | Available at www.wincan.com |
Flyability Inspector Software | Paid premium version required in order to create the trajectory point cloud that is needed for the WinCan VX import | For questions about Inspector Software contact Flyability |
Prepare project in Flyability-Inspector Software
Download and install the premium version of the Inspector-Software. The premium version is required to process and generate the flight path (trajectory) and to generate the point cloud recorded during the flight. The premium version is free of charge for the first 30 days.
...
The last step is to create the trajectory in the Inspector software:
...
Import drone project into WinCan VX
Create project
Create a new project in WinCan VX with the desired standard. To do this, click on "Projects->New Project":
...