Question/Problem:
The device VTG2 is an overlay provided by the manufacturer PS hard- & software GmbH. The overlay is mostly use by It is an integrated part of some camera systems made by RAUSCH GmbH and RICO GmbH.
To use this osd OSD device the corresponding drivers from the company PS hard- & software GmbH have to be installed on the PCcomputer. And there
There are also different version sub-types of the device VTG2. To How can the operator quickly figure out what which device and divers are installed, you have this DeviceEnumerator.exe tool.drivers have been installed?
Answer/Solution:
Run the tool DeviceEnumerator.exe located in C:\Program Files (x86)\CDLab\Assemblies.
...
VTG2 is found but the Virtual COM-port is not enabled.
...
VTG2 found but the
...
drivers for the serial port is not installed
...
CVTG2 found and all driver are installed
...
...
Unknown situation detected
...
| Info |
|---|
If the test tool shows a red message info, the Camera reseller as to check the VTG2 installation. And necessary install any missing drivers. |