PS-VTG IBOS Troubleshooting - Hardware vanishing

Find the folder of the original drivers and right click and install each config file inside. If you get a driver error protection error. Follow the next steps:

1. Select the “Start” button.

   Type “startup”.

   Select “Change advanced startup settings“.

   Select “Restart now” under the “Advanced startup” area.

   Select “Troubleshoot“.

   Select “Advanced Options“.

   Select “Startup Options“.

   Select “Restart“.

   A menu will appear where you can press “7” on your keyboard to choose “Disable driver signing enforcement“.

Now Device Driver Signing should be disabled, allowing you to install any driver you like in Windows 10 until you reboot.

Once this is done try the right click method again and it should warn you that your installed a non-verified driver. This will now install the device as a USB Port Named PS-VTG USB.

Once you have done this you need to right click the PS-VTG Properties and click the checkbox asking if you want to enable the Virtual Com Port.

This will then install a Com port that you use and select the right COM PORT in Wincan.