IBAK SoftControl, Functionalities

This article describes the usage of the virtual text generator IBAK SoftControl together with the application WinCan VX

Overview

Open

WinCan VX Settings

1. IBAK SoftControl Toolbars in WinCan VX

   Open

   

    

2. Core functions like show section data, set distance can still be launched directly from the WinCan VX OSD panel.

    

3. Additional features like laser measurement for measuring deformations at a certain point in the pipe, but also all settings for the Video and OSD devices need to be launched directly from the SoftControl toolbar:

WinCan VX on IBAK Minilite/Mainlite

1. If you want to use WinCan VX on the IBAK Minilite or Mainlite system, you also need to use the SoftControl communication interface. There are only a few differences that you need to consider:

   1. Screen resolution
      WinCan VX requires a minimum screen resolution of 1024 x 768. If your system does not fulfil this requirement, the WinCan VX setup cannot be launched. So before installing the WinCan VX, adjust the Windows custom scaling and set it to 100%. Once done, you need to restart your PC.
      
      

       

   2. User Interface
      As the screen resolutions on Mini- and Mainlite is quite small, you need to adjust the user interface of WinCan VX in order to get the best possible user experience. We recommend to use the “CompactInspection” window layout, but with a font size of 14:
      
      

       

2. IBAK Minilite system
   
   

    

3. IBAK Mainlite system
   
   

    

Related articles